Stepper Systems
Stepper Systems
Stepper Drives - Stepper Motors - Stepper Power Supplies - Interface Cables - Configuration Software
-
Stepper Motors in Single, Dual-Shaft and Encoder Models
-
IP65 Stepper Motors in Single-Shaft Models
-
Integrated Stepper Motors / Drives
-
Modular (Kit) Stepper Encoders
High performance microstepper drives with high torque stepper motors
SureStep® stepping systems provide simple and accurate control of position and speed where open-loop control and cost are considerations.
- Pulses (or "step" and "direction" signals) from an AutomationDirect PLC or other indexer motion controller are "translated" by the microstepping drive into precise movement of the stepping motor shaft.
- SureStep Advanced stepper drives accept pulse inputs, but they also can be commanded by an analog speed signal or by serial communication.
- SureStep serial communications control allows internal indexing (point-to-point moves), velocity control, run-to-sensor, etc.
- SureStep stepping motors use 2-phase technology with 200 full steps per revolution or 1.8" per full step.
- SureStep microstepping drives use advanced microstepping technology to smooth motor motion and stepping response in order to minimize vibration problems.
- The SureStep family has options for open loop control (no encoder), position monitoring (external encoder feedback), and inclusive position verification (integrated motor/drives with internal encoder).
- SureStep stepper motor, microstepper drive and power supply products provide low-cost, reliable, high quality solutions to positioning and motion control application requirements.
Complete SureStep Stepping Systems Overview
- £32.00SKU: STP-MTR-17048STP-MTR-17048STEPPER MOTOR NEMA 17 SINGLE SHAFT 83 oz-in BIPOLAR W/1ft CABLE Learn More
- £34.00SKU: STP-MTR-17040DSTP-MTR-17040DSureStep NEMA 17 stepper motor, dual shaft, 61 oz-in holding torque, 1.7 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £28.76SKU: STP-MTR-17040STP-MTR-17040SureStep NEMA 17 stepper motor, single shaft, 61 oz-in holding torque, 1.7 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £10.09SKU: STP-PROSTP-PROSureStep Pro programming software, Windows-based, for use with STP-DRV-4850 & STP-DRV-80100 drives. Requires STP-232RJ11-CBL and PC serial port or USB adapter. Learn More
- £20.41SKU: STP-232HD15-CBL-2STP-232HD15-CBL-2ZIPLink Communication Cable for SureStep drives, 6P4C RJ11 connector to 15-pin high density connector, 3-wire, RS-232, 26AWG, 2.0 meter (6.6 ft.) length. Learn More
- £12.61SKU: STP-232RJ12-CBL-2STP-232RJ12-CBL-2ZIPLink Communication Cable for SureStep drives, 6P4C RJ11 connector to 6-pin RJ12 connector, 3-wire, RS-232, 26AWG, 2.0 meter (6.6 ft.) length. Learn More
- £298.00SKU: STP-PWR-7005STP-PWR-7005Linear power supply for SureStep stepping systems, 70VDC at 5A (at full load) unregulated and 5VDC at 0.5A regulated. 120/240 VAC, 50/60 Hz input. Learn More
- £303.00SKU: STP-PWR-4810STP-PWR-4810Linear power supply for SureStep stepping systems, 48VDC at 10A (at full load) unregulated and 5VDC at 0.5A regulated. 120/240 VAC, 50/60 Hz input. Learn More
- £220.00SKU: STP-PWR-4805STP-PWR-4805Linear power supply for SureStep stepping systems, 48VDC at 5A (at full load) unregulated and 5VDC at 0.5A regulated. 120/240 VAC, 50/60 Hz input. Learn More
- £180.00SKU: STP-PWR-3204STP-PWR-3204STEPPER POWER SUPPLY 32VDC 4A WITH 5VDC 0.5A AUX SUPPLY Learn More
- £161.00SKU: STP-DRVA-BR-100STP-DRVA-BR-100Braking resistor, optional, for use with STP-DRV-RC-050 regen clamp, 100 watt, 10 ohm. Used to supply additional braking power. Learn More
- £101.00SKU: STP-DRVA-RC-050STP-DRVA-RC-050Regen clamp, 50 watt continuous dissipation, for use with DC-powered stepper and servo drives, 24-80 VDC supply voltage. Learn More
- £399.00SKU: STP-DRV-80100STP-DRV-80100SureStep microstepping drive, 10A per phase, 24-80 VDC, 2-phase bipolar PWM output; step and direction, CW/CCW, quad, analog, internal indexing control modes. Learn More
- £128.00SKU: STP-DRV-6575STP-DRV-6575SureStep microstepping drive, 7.5A per phase, 24-65 VDC, 2-phase bipolar PWM output; step and direction control mode. Learn More
- £27.02SKU: STP-MTRA-SC-3812STP-MTRA-SC-3812Coupling, 3/8 inch to 1/2 inch, engineered polymer, for TRDA-20 and TRDA-25 series encoders and NEMA size 34 stepper motors. Learn More
- £27.02SKU: STP-MTRA-SC-1412STP-MTRA-SC-1412Coupling, 1/4 inch to 1/2 inch, engineered polymer, for TRDA-2E series encoders and NEMA size 34 stepper motors. Learn More
- £11.11SKU: STP-MTRA-RB-85STP-MTRA-RB-85Reducer bushing, 8mm OD to 5mm ID, 16mm length, aluminum alloy. Connects NEMA size 17 stepper motors to Koyo TRD-NH and TRD-SH hollow shaft encoders. Learn More