Stepper Systems
Stepper Systems
Stepper Drives - Stepper Motors - Stepper Power Supplies - Interface Cables - Configuration Software
-
Stepper Motors in Single, Dual-Shaft and Encoder Models
-
IP65 Stepper Motors in Single-Shaft Models
-
Integrated Stepper Motors / Drives
-
Modular (Kit) Stepper Encoders
High performance microstepper drives with high torque stepper motors
SureStep® stepping systems provide simple and accurate control of position and speed where open-loop control and cost are considerations.
- Pulses (or "step" and "direction" signals) from an AutomationDirect PLC or other indexer motion controller are "translated" by the microstepping drive into precise movement of the stepping motor shaft.
- SureStep Advanced stepper drives accept pulse inputs, but they also can be commanded by an analog speed signal or by serial communication.
- SureStep serial communications control allows internal indexing (point-to-point moves), velocity control, run-to-sensor, etc.
- SureStep stepping motors use 2-phase technology with 200 full steps per revolution or 1.8" per full step.
- SureStep microstepping drives use advanced microstepping technology to smooth motor motion and stepping response in order to minimize vibration problems.
- The SureStep family has options for open loop control (no encoder), position monitoring (external encoder feedback), and inclusive position verification (integrated motor/drives with internal encoder).
- SureStep stepper motor, microstepper drive and power supply products provide low-cost, reliable, high quality solutions to positioning and motion control application requirements.
Complete SureStep Stepping Systems Overview
- £354.00SKU: STP-MTRAC-34156STP-MTRAC-34156SureStep stepper motor, NEMA 34 frame, IP40, single shaft, 2.5A, 1841 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. Learn More
- £329.00SKU: STP-MTRAC-34115STP-MTRAC-34115SureStep stepper motor, NEMA 34 frame, IP40, single shaft, 2.05A, 1110 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. Learn More
- £318.00SKU: STP-MTRAC-34075STP-MTRAC-34075SureStep stepper motor, NEMA 34 frame, IP40, single shaft, 2.15A, 821 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. Learn More
- £119.00SKU: STP-MTRAC-23078STP-MTRAC-23078SureStep stepper motor, NEMA 23 frame, IP40, single shaft, 0.71A, 227 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. Learn More
- £85.00SKU: STP-MTRAC-23055STP-MTRAC-23055SureStep stepper motor, NEMA 23 frame, IP40, single shaft, 0.71A, 149 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. Learn More
- £76.00SKU: STP-MTRAC-23044STP-MTRAC-23044SureStep stepper motor, NEMA 23 frame, IP40, single shaft, 0.71A, 75 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. Learn More
- £49.00SKU: STP-EXTH-020STP-EXTH-02020 ft. extension cable for use with all high-current (greater than 5A) SureStep stepping motors, terminated with mating connector. Use w/ STP-MTRH-xxxxx motors. Learn More
- £22.21SKU: STP-EXT-020STP-EXT-020CABLE MOTOR EXTENSION 20ft W/CONNECTOR FOR STP-MTR MOTORS Learn More
- £251.00SKU: STP-MTRH-34127STP-MTRH-34127SureStep NEMA 34 stepper motor, single shaft, 1,290 oz-in holding torque, 6.3 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £213.00SKU: STP-MTRH-34097STP-MTRH-34097SureStep NEMA 34 stepper motor, single shaft, 861 oz-in holding torque, 6.3 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £173.00SKU: STP-MTRH-34066STP-MTRH-34066SureStep NEMA 34 stepper motor, single shaft, 434 oz-in holding torque, 6.3 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £155.00SKU: STP-MTR-34066STP-MTR-34066STEPPER MOTOR NEMA 34 SINGLE SHAFT 434 oz-in BIPOLAR W/1ft CABLE Learn More
- £73.00SKU: STP-MTRH-23079STP-MTRH-23079SureStep NEMA 23 stepper motor, single shaft, 286 oz-in holding torque, 5.6 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £66.00SKU: STP-MTR-23079STP-MTR-23079STEPPER MOTOR NEMA 23 SINGLE SHAFT 276 oz-in BIPOLAR W/1ft CABLE Learn More
- £51.00SKU: STP-MTR-23055STP-MTR-23055STEPPER MOTOR NEMA 23 SINGLE SHAFT 166 oz-in BIPOLAR W/1ft CABLE Learn More
- £55.00SKU: STP-MTR-17060STP-MTR-17060SureStep NEMA 17 stepper motor, single shaft, 115 oz-in holding torque, 2.0 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £32.00SKU: STP-MTR-17048STP-MTR-17048STEPPER MOTOR NEMA 17 SINGLE SHAFT 83 oz-in BIPOLAR W/1ft CABLE Learn More
- £28.76SKU: STP-MTR-17040STP-MTR-17040SureStep NEMA 17 stepper motor, single shaft, 61 oz-in holding torque, 1.7 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £27.02SKU: STP-MTRA-SC-3812STP-MTRA-SC-3812Coupling, 3/8 inch to 1/2 inch, engineered polymer, for TRDA-20 and TRDA-25 series encoders and NEMA size 34 stepper motors. Learn More
- £27.02SKU: STP-MTRA-SC-1412STP-MTRA-SC-1412Coupling, 1/4 inch to 1/2 inch, engineered polymer, for TRDA-2E series encoders and NEMA size 34 stepper motors. Learn More
- £11.11SKU: STP-MTRA-RB-85STP-MTRA-RB-85Reducer bushing, 8mm OD to 5mm ID, 16mm length, aluminum alloy. Connects NEMA size 17 stepper motors to Koyo TRD-NH and TRD-SH hollow shaft encoders. Learn More