Stepper Systems
Stepper Systems
Stepper Drives - Stepper Motors - Stepper Power Supplies - Interface Cables - Configuration Software
-
Stepper Motors in Single, Dual-Shaft and Encoder Models
-
IP65 Stepper Motors in Single-Shaft Models
-
Integrated Stepper Motors / Drives
-
Modular (Kit) Stepper Encoders
High performance microstepper drives with high torque stepper motors
SureStep® stepping systems provide simple and accurate control of position and speed where open-loop control and cost are considerations.
- Pulses (or "step" and "direction" signals) from an AutomationDirect PLC or other indexer motion controller are "translated" by the microstepping drive into precise movement of the stepping motor shaft.
- SureStep Advanced stepper drives accept pulse inputs, but they also can be commanded by an analog speed signal or by serial communication.
- SureStep serial communications control allows internal indexing (point-to-point moves), velocity control, run-to-sensor, etc.
- SureStep stepping motors use 2-phase technology with 200 full steps per revolution or 1.8" per full step.
- SureStep microstepping drives use advanced microstepping technology to smooth motor motion and stepping response in order to minimize vibration problems.
- The SureStep family has options for open loop control (no encoder), position monitoring (external encoder feedback), and inclusive position verification (integrated motor/drives with internal encoder).
- SureStep stepper motor, microstepper drive and power supply products provide low-cost, reliable, high quality solutions to positioning and motion control application requirements.
Complete SureStep Stepping Systems Overview
- £50.00SKU: STP-485DB9-CBL-2STP-485DB9-CBL-2SureStep communication cable, 9-pin female D-sub to 5-pin connector, 6.5ft/2m cable length. For use with SureStep STP-MTRD-xxxxxR integrated stepper motor/drives. Learn More
- £22.81SKU: STP-CBL-EA6STP-CBL-EA6SureStep encoder cable, 10-pin connector to pigtail, 6ft cable length. For use with SureStep integrated stepper motor/drives with external encoder. Learn More
- £40.00SKU: STP-CBL-CA20STP-CBL-CA20SureStep control cable, 11-pin connector to pigtail, 20ft cable length. For use with SureStep STP-MTRD-17038 and STP-MTRD-17038E integrated stepper motor/drives. Learn More
- £40.00SKU: STP-CBL-EA20STP-CBL-EA20SureStep encoder cable, 10-pin connector to pigtail, 20ft cable length. For use with SureStep integrated stepper motor/drives with external encoder. Learn More
- £13.21SKU: STP-232RJ11-CBLSTP-232RJ11-CBLProgramming/communication cable for STP-DRV-80100 and STP-DRV-4850 drives, DB9 to RJ11 connector, 10 foot length. One included w/ each 4850 and 80100 drive. Learn More
- £49.00SKU: STP-EXTH-020STP-EXTH-02020 ft. extension cable for use with all high-current (greater than 5A) SureStep stepping motors, terminated with mating connector. Use w/ STP-MTRH-xxxxx motors. Learn More
- £22.21SKU: STP-EXT-020STP-EXT-020CABLE MOTOR EXTENSION 20ft W/CONNECTOR FOR STP-MTR MOTORS Learn More
- £277.00SKU: STP-MTRH-34127DSTP-MTRH-34127DSureStep NEMA 34 stepper motor, dual shaft, 1,290 oz-in holding torque, 6.3 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £251.00SKU: STP-MTRH-34127STP-MTRH-34127SureStep NEMA 34 stepper motor, single shaft, 1,290 oz-in holding torque, 6.3 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £236.00SKU: STP-MTRH-34097DSTP-MTRH-34097DSureStep NEMA 34 stepper motor, dual shaft, 861 oz-in holding torque, 6.3 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £213.00SKU: STP-MTRH-34097STP-MTRH-34097SureStep NEMA 34 stepper motor, single shaft, 861 oz-in holding torque, 6.3 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £192.00SKU: STP-MTRH-34066DSTP-MTRH-34066DSureStep NEMA 34 stepper motor, dual shaft, 434 oz-in holding torque, 6.3 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £173.00SKU: STP-MTRH-34066STP-MTRH-34066SureStep NEMA 34 stepper motor, single shaft, 434 oz-in holding torque, 6.3 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £175.00SKU: STP-MTR-34066DSTP-MTR-34066DSureStep NEMA 34 stepper motor, dual shaft, 434 oz-in holding torque, 2.8 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £155.00SKU: STP-MTR-34066STP-MTR-34066STEPPER MOTOR NEMA 34 SINGLE SHAFT 434 oz-in BIPOLAR W/1ft CABLE Learn More
- £79.00SKU: STP-MTRH-23079DSTP-MTRH-23079DSureStep NEMA 23 stepper motor, dual shaft, 286 oz-in holding torque, 5.6 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £73.00SKU: STP-MTRH-23079STP-MTRH-23079SureStep NEMA 23 stepper motor, single shaft, 286 oz-in holding torque, 5.6 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £72.00SKU: STP-MTR-23079DSTP-MTR-23079DSureStep NEMA 23 stepper motor, dual shaft, 276 oz-in holding torque, 2.8 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £66.00SKU: STP-MTR-23079STP-MTR-23079STEPPER MOTOR NEMA 23 SINGLE SHAFT 276 oz-in BIPOLAR W/1ft CABLE Learn More
- £58.00SKU: STP-MTR-23055DSTP-MTR-23055DSureStep NEMA 23 stepper motor, dual shaft, 166 oz-in holding torque, 2.8 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £51.00SKU: STP-MTR-23055STP-MTR-23055STEPPER MOTOR NEMA 23 SINGLE SHAFT 166 oz-in BIPOLAR W/1ft CABLE Learn More
- £62.00SKU: STP-MTR-17060DSTP-MTR-17060DSureStep NEMA 17 stepper motor, dual shaft, 125 oz-in holding torque, 2.0 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £55.00SKU: STP-MTR-17060STP-MTR-17060SureStep NEMA 17 stepper motor, single shaft, 115 oz-in holding torque, 2.0 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More
- £37.00SKU: STP-MTR-17048DSTP-MTR-17048DSureStep NEMA 17 stepper motor, dual shaft, 83 oz-in holding torque, 2.0 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More