JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

Competitively Priced
ISO 9001 Certified
Technical Support

MT8102IE

Weintek MT8102iE 10.1" TFT colour graphic touchscreen HMI, widescreen 1024x600 pixel display

SKU: MT8102IEU
Stock Availability: Retired Product

Retired product, consider cMT2108X2 instead

Weintek MT8102iE 10.1" 1024 x 600 TFT LCD, LED Backlight, Fan-less, COM2 & COM3 RS-485 support MPI 187.5K, Built-in Power Isolation, NEMA4 / IP65 Compliant Front Panel.

Stocked in the UK

Programmed using the free EasyBuilder Pro software.

Stock Availability

Retired Product

Product Documents

  IE Series Brochure
  MT8102IE Datasheet
  MT8102IE Installation Instructions

Product Spec

Model	MT8102iEU
Display	10.1” TFT
Resolution	1024 x 600
Brightness (cd/ ㎡ )	350
Contrast Ratio	500: 1
Backlight Type	LED
Backlight Life Time	>50,000 hrs.
Colours	16.7M
LCD Viewing Angle (T/B/L/R)	60/60/70/70
Pixel Pitch (mm)	0.2175(H) x 0.2088(V)
Type	4-wire Resistive Type
Accuracy	Active Area Length(X)±2%, Width(Y)±2%
Flash	128 MB
RAM	128 MB
Processor	32-bit RISC 600MHz
USB Host	USB 2.0 x 1
Ethernet	10/100 Base-T x 1
WiFi	N/A
COM Port	Con.A: COM1 RS-485 2W, COM2 RS-485 2W/4W, COM3 RS-485 2W/4W1 Con.B: COM1 RS-232 / COM3 RS-2322
RS-485 Dual Isolation	N/A
RTC	Built-in
Input Power	24±20%VDC
Power Isolation	Built-in
Power Consumption	600mA@24VDC
Voltage Resistance	500VAC (1 min.)
Isolation Resistance	Exceed 50MΩ at 500VDC
Vibration Endurance	10 to 25Hz (X, Y, Z direction 2G 30 minutes)
PCB Coating	Yes
Enclosure	Plastic
Dimensions WxHxD	271 x 213 x 36.4 mm
Panel Cutout	260 x 202 mm
Weight	Approx. 1 kg
Mount	Panel mount
Protection Structure	UL Type 4X (indoor use only)*3/ NEMA4 / IP65 Compliant Front Panel
Storage Temperature	-20° ~ 60° C (-4° ~ 140° F)
Operating Temperature	0° ~ 50° C (32° ~ 122° F)
Relative Humidity	10% ~ 90% (non-condensing)
CE	CE marked
UL	cULus Listed (UL 61010-2-201)
ATEX	N/A
Software	EasyBuilder Pro EasyAccess 2.0 (Optional)
*1 MT8102iE: COM3 RS-485 4W will not be available when COM1 RS-485 2W is used. ( Please use EasyBuilder Pro V6.01.01 or later versions.)
*2 MT8102iE: Only Tx & Rx (no RTS/CTS) may be used for COM1 RS-232 when COM3 RS-232 is also used.