ZIPLink Pre-Wired Connection Cables and Modules
Why spend the time wiring each PLC I/O point to a terminal when you can get them prewired? ZIPLink pre-wired cables and modules save you valuable time, keep your installation clean and efficient, and use half the space at a fraction of the cost of standard terminal blocks.
£88.00
SKU: ZL-CBL50-2P
ZL-CBL50-2P
ZIPLink servo cable, connects SureServo amplifiers to custom wired devices, 50-pin connector to pigtail, 28 AWG, 2.0 meter (6.6 ft.) length.
Learn More
£82.00
SKU: ZL-CBL50-1P
ZL-CBL50-1P
ZIPLink servo cable, connects SureServo amplifiers to custom wired devices, 50-pin connector to pigtail, 28 AWG, 1.0 meter (3.3 ft.) length.
Learn More
£16.21
SKU: SR44-485RJ45-CBL-2
SR44-485RJ45-CBL-2
ZIPLink Stellar soft starter communication cable, 6-pin RJ45 connector to 6-pin RJ12 connector, 3-wire, RS-485, 26AWG, 2.0 meter (6.6 ft.) length.
Learn More
£19.81
SKU: SR44-485HD15-CBL-2
SR44-485HD15-CBL-2
ZIPLink Stellar soft starter communication cable, 6-pin RJ45 connector to 15-pin high density connector, 3-wire, RS-485, 26AWG, 2.0 meter (6.6 ft.) length.
Learn More
£89.00
SKU: ZL-SVC-CBL50-2
£79.00
SKU: ZL-SVC-CBL50-1
£18.01
SKU: SVC-485RJ12-CBL-2
SVC-485RJ12-CBL-2
ZIPLink communications servo cable, for SureServo amplifiers, shielded, RJ12 to 6-pin IEEE, 2.0 meter (6.6 ft.).
Learn More
£17.24
SKU: SVC-485HD15-CBL-2
SVC-485HD15-CBL-2
ZIPLink communications servo cable, for SureServo amplifiers, shielded, HD 15-pin to 6-pin IEEE, 2.0 meter (6.6 ft.).
Learn More
£22.21
SKU: SVC-485CFG-CBL-2
SVC-485CFG-CBL-2
ZIPLink communications servo cable, for SureServo amplifier configuration, shielded, RJ45 to 6-pin IEEE, 2.0 meter (6.6 ft.).
Learn More
£15.98
SKU: SVC-232RJ12-CBL-2
SVC-232RJ12-CBL-2
ZIPLink communications servo cable, for SureServo amplifiers, shielded, RJ12 to 6-pin IEEE, 2.0 meter (6.6 ft.).
Learn More
£14.41
SKU: GS-ISOCON-CBL-2
GS-ISOCON-CBL-2
ZIPLink communications drive cable, for GS series drives and FA-ISOCON, RJ12 to 5-pin terminal block connector, 26 AWG, 2.0 meter (6.6 ft.) length.
Learn More
£10.21
SKU: GS-485RJ12-CBL-2
GS-485RJ12-CBL-2
ZIPLink communications drive cable, for GS series drives and ZL-CDM-RJ12Xnn distribution module, RJ12 to RJ12, 26 AWG, 2.0 meter (6.6 ft.) length.
Learn More
£9.91
SKU: GS-EDRV-CBL-2
GS-EDRV-CBL-2
ZIPLink communications drive cable, for GS series drives and GS-EDRV communications module, RJ12 to RJ12, 26 AWG, 2.0 meter (6.6 ft.) length.
Learn More
£14.05
SKU: GS-485HD15-CBL-2
£12.78
SKU: GS-RJ12-CBL-2
£9.30
SKU: ZL-RJ12-CBL-2P
£8.10
SKU: ZL-RJ12-CBL-2
ZL-RJ12-CBL-2
ZIPLink communications cable, 6-pin RJ12 to 6-pin RJ12, 26 AWG, 2.0 meter (6.6 ft.) length.
Learn More
£19.21
SKU: ZL-DB25-CBL-2
ZL-DB25-CBL-2
ZIPLink communications cable, 25-pin male D-sub to 25-pin female D-sub, 28 AWG, 2.0 meter (6.6 ft.) length.
Learn More
£16.21
SKU: ZL-DB15-CBL-2
ZL-DB15-CBL-2
ZIPLink communications cable, 15-pin male D-sub to 15-pin female D-sub, 28 AWG, 2.0 meter (6.6 ft.) length.
Learn More
£12.01
SKU: ZL-DB9-CBL-2
ZL-DB9-CBL-2
ZIPLink communications cable, 9-pin male D-sub to 9-pin female D-sub, 28 AWG, 2.0 meter (6.6 ft.) length.
Learn More
£61.00
SKU: ZL-CBL40-2P
ZL-CBL40-2P
ZIPLink PLC I/O cable, for 3rd party devices, 40-pin connector to pigtail, 24 AWG, 2.0 meter (6.6 ft.) length.
Learn More
£44.00
SKU: ZL-CBL40-1P
ZL-CBL40-1P
ZIPLink PLC I/O cable, for 3rd party devices, 40-pin connector to pigtail, 24 AWG, 1.0 meter (3.3 ft.) length.
Learn More
£37.00
SKU: ZL-CBL24-2P
ZL-CBL24-2P
ZIPLink PLC I/O cable, for 3rd party devices, 24-pin connector to pigtail, 24 AWG, 2.0 meter (6.6 ft.) length.
Learn More