DirectLogic 205 (Micro Modular PLC)

9-slot base, requires external 125VDC power (no isolated auxiliary output power), local I/O expandable. Replaces D2-09BDC-2. Learn More

6-slot base, requires external 125VDC power (no isolated auxiliary output power), local I/O expandable. Replaces D2-06BDC-2. Learn More

9-slot base, requires external 12-24 VDC power (no isolated auxiliary output power), local I/O expandable. Replaces D2-09BDC-1. Learn More

6-slot base, requires external 12-24 VDC power (no isolated auxiliary output power), local I/O expandable. Replaces D2-06BDC-1. Learn More

4-slot base, requires external 12-24 VDC power (no isolated auxiliary output power), local I/O expandable. Replaces D2-04BDC-1. Learn More

3-slot base, requires external 12-24 VDC power (no isolated auxiliary output power), local I/O expandable. Replaces D2-03BDC-1. Learn More

9-slot base, requires external 110-220 VAC power, 24VDC 300mA isolated auxiliary output power, local I/O expandable. Replaces D2-09B. Learn More

6-slot base, requires external 110-220 VAC power, 24VDC 300mA isolated auxiliary output power, local I/O expandable. Replaces D2-06B. Learn More

4-slot base, requires external 110-220 VAC power, 24VDC 300mA isolated auxiliary output power, local I/O expandable. Replaces D2-04B. Learn More

3-slot base, requires external 110-220 VAC power, 24VDC 300mA isolated auxiliary output power, local I/O expandable. Replaces D2-03B. Learn More

CLICK analog CPUs, DL06, D2-250(-1), D2-260, D3-350, and Productivity3000 CPU battery (optional); and replacement battery for the C-more touch panels. Learn More

Smart Distributed I/O base controller user manual. Covers F2-SDS-1. Also available for free download. Learn More

Ethernet Base Controller for DL205 base for connection to Do-more Ethernet I/O, PLC Ethernet master (Hx-ERM100) or PC Ethernet network interface card. Learn More

Upgrade kit to allow existing D2-HPP Handheld Programmers with firmware V1.82 or earlier to program the DL05, DL06 and DL105 units. Learn More

DL205 Handheld Programmer Manual. Order manual separately. Learn More

DL205 Handheld Programmer. Use with all DL05, DL06, DL105, DL205 and D3-350 CPUs. Supports both RLL and RLLPLUS instructions. Includes cable (DV-1000CBL). Learn More

DirectSOFT programming cable kit, containing 1 each of: D2-DSCBL, D3-DSCBL-1, D3-DSCBL-2, D4-DSCBL. Saves over the price of cables purchased separately. Learn More

12 ft. (3.66m) shielded pigtail cable for port 2 of a DL06, D2-250(-1) or D2-260 CPU. 15-pin D-shell male SVGA connector to 14 tinned wires. Learn More

12 ft. (3.66m) RS-232 shielded PC programming cable for DL06, D2-250(-1), D2-260 and D0-DCM. 9-pin D-shell female connector to a 15-pin male HD15 connector. Learn More

12 ft. (3.66m) RS-232 shielded PC programming cable for DirectLOGIC, Do-more, and CLICK CPUs. 9-pin D-shell female connector to an RJ12 6P6C connector. Learn More

DL205 Installation and I/O Manual. Covers installation and wiring, plus specifications of all discrete I/O modules. Learn More

Ethernet Remote Master module, for Ethernet remote I/O on a 10/100Base-T network at 10/100 Mbps. (Not compatible with D2-230 CPU or H2-WPLCx-xx). Learn More

DL205 Analog modules, including the F2-04RTD and F2-04THM, are covered in the DL205 Analog I/O Manual. Order manual separately. Learn More

4-channel thermocouple input module, 0.1 degrees C, 16 bit, supports: J, E, K, R, S, T, B, N, C; 0-5 VDC, -5 to +5 VDC, 0-156 mVDC, -156 to +156 mVDC. Learn More