General Purpose Cast Iron Worm Gearboxes
IronHorse cast iron worm gearboxes (worm gear speed reducers) are mechanical power transmission components that can drive a load at a reduced fixed ratio of the motor speed. Output torque is increased by that same ratio, while horsepower is unchanged (less efficiency losses).
£62.00
SKU: WG-325-BASE
WG-325-BASE
IronHorse mounting base, for use with WG-325 series gearboxes. Mounting hardware included.
Learn More
£379.00
SKU: WG-206-060-R
WG-206-060-R
IronHorse heavy-duty worm gearbox, 60:1 ratio, 56C-Face input, right hand, 1in diameter output shaft, nominal 0.33 hp at 1.0 SF, 750lbf-in mechanical output torque, 2-1/16in center distance, cast iron housing, tapped-base mount.
Learn More
£379.00
SKU: WG-206-040-R
WG-206-040-R
IronHorse heavy-duty worm gearbox, 40:1 ratio, 56C-Face input, right hand, 1in diameter output shaft, nominal 0.5 hp at 1.0 SF, 1120lbf-in mechanical output torque, 2-1/16in center distance, cast iron housing, tapped-base mount.
Learn More
£379.00
SKU: WG-206-020-R
WG-206-020-R
IronHorse heavy-duty worm gearbox, 20:1 ratio, 56C-Face input, right hand, 1in diameter output shaft, nominal 1 hp at 1.0 SF, 914lbf-in mechanical output torque, 2-1/16in center distance, cast iron housing, tapped-base mount.
Learn More
£379.00
SKU: WG-206-015-R
WG-206-015-R
IronHorse heavy-duty worm gearbox, 15:1 ratio, 56C-Face input, right hand, 1in diameter output shaft, nominal 1 hp at 1.0 SF, 1002lbf-in mechanical output torque, 2-1/16in center distance, cast iron housing, tapped-base mount.
Learn More
£379.00
SKU: WG-206-010-R
WG-206-010-R
IronHorse heavy-duty worm gearbox, 10:1 ratio, 56C-Face input, right hand, 1in diameter output shaft, nominal 1.5 hp at 1.0 SF, 935lbf-in mechanical output torque, 2-1/16in center distance, cast iron housing, tapped-base mount.
Learn More
£379.00
SKU: WG-206-005-R
WG-206-005-R
IronHorse heavy-duty worm gearbox, 5:1 ratio, 56C-Face input, right hand, 1in diameter output shaft, nominal 2 hp at 1.0 SF, 925lbf-in mechanical output torque, 2-1/16in center distance, cast iron housing, tapped-base mount.
Learn More
£299.00
SKU: WG-175-060-R
WG-175-060-R
IronHorse heavy-duty worm gearbox, 60:1 ratio, 56C-Face input, right hand, 0.875in diameter output shaft, nominal 0.25 hp at 1.0 SF, 433lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£299.00
SKU: WG-175-040-R
WG-175-040-R
IronHorse heavy-duty worm gearbox, 40:1 ratio, 56C-Face input, right hand, 0.875in diameter output shaft, nominal 0.33 hp at 1.0 SF, 714lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£299.00
SKU: WG-175-020-R
WG-175-020-R
IronHorse heavy-duty worm gearbox, 20:1 ratio, 56C-Face input, right hand, 0.875in diameter output shaft, nominal 0.75 hp at 1.0 SF, 737lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£299.00
SKU: WG-175-015-R
WG-175-015-R
IronHorse heavy-duty worm gearbox, 15:1 ratio, 56C-Face input, right hand, 0.875in diameter output shaft, nominal 0.75 hp at 1.0 SF, 554lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£299.00
SKU: WG-175-010-R
WG-175-010-R
IronHorse heavy-duty worm gearbox, 10:1 ratio, 56C-Face input, right hand, 0.875in diameter output shaft, nominal 1 hp at 1.0 SF, 515lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£299.00
SKU: WG-175-005-R
WG-175-005-R
IronHorse heavy-duty worm gearbox, 5:1 ratio, 56C-Face input, right hand, 0.875in diameter output shaft, nominal 1.5 hp at 1.0 SF, 499lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£47.00
SKU: WG-262-BASE
WG-262-BASE
IronHorse mounting base, for use with WG-262 series gearboxes. Mounting hardware included.
Learn More
£39.00
SKU: WG-237-BASE
WG-237-BASE
IronHorse mounting base, for use with WG-237 series gearboxes. Mounting hardware included.
Learn More
£34.00
SKU: WG-206-BASE
WG-206-BASE
IronHorse mounting base, for use with WG-206 series gearboxes. Mounting hardware included.
Learn More
£28.76
SKU: WG-175-BASE
WG-175-BASE
IronHorse mounting base, for use with WG-175 series gearboxes. Mounting hardware included.
Learn More
£357.00
SKU: WG-206-060-L
WG-206-060-L
IronHorse heavy-duty worm gearbox, 60:1 ratio, 56C-Face input, left hand, 1in diameter output shaft, nominal 0.33hp at 1.0 SF, 750lbf-in mechanical output torque, 2-1/16in center distance, cast iron housing, tapped-base mount.
Learn More
£357.00
SKU: WG-206-040-L
WG-206-040-L
IronHorse heavy-duty worm gearbox, 40:1 ratio, 56C-Face input, left hand, 1in diameter output shaft, nominal 0.5hp at 1.0 SF, 1120lbf-in mechanical output torque, 2-1/16in center distance, cast iron housing, tapped-base mount.
Learn More
£280.00
SKU: WG-175-040-L
WG-175-040-L
IronHorse heavy-duty worm gearbox, 40:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 0.33hp at 1.0 SF, 714lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£280.00
SKU: WG-175-020-L
WG-175-020-L
IronHorse heavy-duty worm gearbox, 20:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 0.75hp at 1.0 SF, 737lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£280.00
SKU: WG-175-015-L
WG-175-015-L
IronHorse heavy-duty worm gearbox, 15:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 0.75hp at 1.0 SF, 554lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£280.00
SKU: WG-175-010-L
WG-175-010-L
IronHorse heavy-duty worm gearbox, 10:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 1hp at 1.0 SF, 515lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£280.00
SKU: WG-175-005-L
WG-175-005-L
IronHorse heavy-duty worm gearbox, 5:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 1.5hp at 1.0 SF, 499lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£62.00SKU: WG-325-BASEWG-325-BASEIronHorse mounting base, for use with WG-325 series gearboxes. Mounting hardware included. Learn More
£379.00SKU: WG-206-060-RWG-206-060-RIronHorse heavy-duty worm gearbox, 60:1 ratio, 56C-Face input, right hand, 1in diameter output shaft, nominal 0.33 hp at 1.0 SF, 750lbf-in mechanical output torque, 2-1/16in center distance, cast iron housing, tapped-base mount. Learn More
£357.00SKU: WG-206-060-LWG-206-060-LIronHorse heavy-duty worm gearbox, 60:1 ratio, 56C-Face input, left hand, 1in diameter output shaft, nominal 0.33hp at 1.0 SF, 750lbf-in mechanical output torque, 2-1/16in center distance, cast iron housing, tapped-base mount. Learn More
£357.00SKU: WG-206-040-LWG-206-040-LIronHorse heavy-duty worm gearbox, 40:1 ratio, 56C-Face input, left hand, 1in diameter output shaft, nominal 0.5hp at 1.0 SF, 1120lbf-in mechanical output torque, 2-1/16in center distance, cast iron housing, tapped-base mount. Learn More
£280.00SKU: WG-175-040-LWG-175-040-LIronHorse heavy-duty worm gearbox, 40:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 0.33hp at 1.0 SF, 714lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount. Learn More
£280.00SKU: WG-175-020-LWG-175-020-LIronHorse heavy-duty worm gearbox, 20:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 0.75hp at 1.0 SF, 737lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount. Learn More
£280.00SKU: WG-175-015-LWG-175-015-LIronHorse heavy-duty worm gearbox, 15:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 0.75hp at 1.0 SF, 554lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount. Learn More
£280.00SKU: WG-175-010-LWG-175-010-LIronHorse heavy-duty worm gearbox, 10:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 1hp at 1.0 SF, 515lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount. Learn More
£280.00SKU: WG-175-005-LWG-175-005-LIronHorse heavy-duty worm gearbox, 5:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 1.5hp at 1.0 SF, 499lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount. Learn More