Power Transmission (Mechanical)
Power transmission products are used in mechanical drivetrains to create movement. Components include linear motion slides and actuators, gearboxes, timing belts/pulleys/bushings, and a host of shaft couplings, bore reducers, and other purely mechanical devices.
£264.00
SKU: SRA16SS-012.000-SL
SRA16SS-012.000-SL
PBC Simplicity 60 Plus series supported shaft, 440C stainless steel, RC50-55, 8-12Ra, 1in diameter, 12in length. For use with 1in PBC bearings.
Learn More
£265.00
SKU: SRA10-024.000-SL
SRA10-024.000-SL
PBC Simplicity 60 Plus series supported shaft, 1060 steel, RC60-65, 8-12Ra, 5/8in diameter, 24in length. For use with 5/8in PBC bearings.
Learn More
£271.00
SKU: LAHP-N23-33WRPBKT
LAHP-N23-33WRPBKT
SureMotion motor mount, anodized aluminum, parallel. For use with LAHP-33 series actuators and NEMA 23 stepper motors.
Learn More
£267.00
SKU: LAHP-N23-33MTRBKT
LAHP-N23-33MTRBKT
SureMotion motor mount, anodized aluminum, axial. For use with LAHP-33 series actuators and NEMA 23 stepper motors.
Learn More
£267.00
SKU: LAHP-N17-33MTRBKT
LAHP-N17-33MTRBKT
SureMotion motor mount, anodized aluminum, axial. For use with LAHP-33 series actuators and NEMA 17 stepper motors.
Learn More
£253.00
SKU: LAHP-N14-25WRPBKT
LAHP-N14-25WRPBKT
SureMotion motor mount, anodized aluminum, parallel. For use with LAHP-25 series actuators and NEMA 14 stepper motors.
Learn More
£263.00
SKU: 3600-8M-30-NG
3600-8M-30-NG
SureMotion timing belt, 8mm pitch, 30mm wide, 450 tooth, 3600mm pitch length (circumference), neoprene, fiberglass reinforced.
Learn More
£254.00
SKU: HBR-77-DS
HBR-77-DS
IronHorse double output shaft, 2.000in. For use with HBR-77 series gearboxes. (4) keys, (1) spacer and (1) retaining ring included.
Learn More
£287.00
SKU: RPSS16-36
RPSS16-36
SureMotion precision ground shaft, rotary, 303 stainless steel, RB-83, 10RMS, 1in diameter, 36in length.
Learn More
£258.00
SKU: SMR4-CDS-24
SMR4-CDS-24
IronHorse screw conveyor drive shaft, 1-1/2in. For use with size 4 shaft mount gearboxes. Mounting hardware included.
Learn More
£253.00
SKU: SMR3-CDS-48
SMR3-CDS-48
IronHorse screw conveyor drive shaft, 3in. For use with size 3 shaft mount gearboxes. Mounting hardware included.
Learn More
£299.00
SKU: WG-175-060-R
WG-175-060-R
IronHorse heavy-duty worm gearbox, 60:1 ratio, 56C-Face input, right hand, 0.875in diameter output shaft, nominal 0.25 hp at 1.0 SF, 433lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£299.00
SKU: WG-175-040-R
WG-175-040-R
IronHorse heavy-duty worm gearbox, 40:1 ratio, 56C-Face input, right hand, 0.875in diameter output shaft, nominal 0.33 hp at 1.0 SF, 714lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£299.00
SKU: WG-175-020-R
WG-175-020-R
IronHorse heavy-duty worm gearbox, 20:1 ratio, 56C-Face input, right hand, 0.875in diameter output shaft, nominal 0.75 hp at 1.0 SF, 737lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£299.00
SKU: WG-175-015-R
WG-175-015-R
IronHorse heavy-duty worm gearbox, 15:1 ratio, 56C-Face input, right hand, 0.875in diameter output shaft, nominal 0.75 hp at 1.0 SF, 554lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£299.00
SKU: WG-175-010-R
WG-175-010-R
IronHorse heavy-duty worm gearbox, 10:1 ratio, 56C-Face input, right hand, 0.875in diameter output shaft, nominal 1 hp at 1.0 SF, 515lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£299.00
SKU: WG-175-005-R
WG-175-005-R
IronHorse heavy-duty worm gearbox, 5:1 ratio, 56C-Face input, right hand, 0.875in diameter output shaft, nominal 1.5 hp at 1.0 SF, 499lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£280.00
SKU: WG-175-040-L
WG-175-040-L
IronHorse heavy-duty worm gearbox, 40:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 0.33hp at 1.0 SF, 714lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£280.00
SKU: WG-175-020-L
WG-175-020-L
IronHorse heavy-duty worm gearbox, 20:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 0.75hp at 1.0 SF, 737lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£280.00
SKU: WG-175-015-L
WG-175-015-L
IronHorse heavy-duty worm gearbox, 15:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 0.75hp at 1.0 SF, 554lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£280.00
SKU: WG-175-010-L
WG-175-010-L
IronHorse heavy-duty worm gearbox, 10:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 1hp at 1.0 SF, 515lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£280.00
SKU: WG-175-005-L
WG-175-005-L
IronHorse heavy-duty worm gearbox, 5:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 1.5hp at 1.0 SF, 499lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£280.00
SKU: WG-175-060-L
WG-175-060-L
IronHorse heavy-duty worm gearbox, 60:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 0.25hp at 1.0 SF, 433lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£299.00
SKU: WG-175-060-D
WG-175-060-D
IronHorse heavy-duty worm gearbox, 60:1 ratio, 56C-Face input, dual, 0.875in diameter output shaft, nominal 0.25 hp at 1.0 SF, 433lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount.
Learn More
£264.00SKU: SRA16SS-012.000-SLSRA16SS-012.000-SLPBC Simplicity 60 Plus series supported shaft, 440C stainless steel, RC50-55, 8-12Ra, 1in diameter, 12in length. For use with 1in PBC bearings. Learn More
£265.00SKU: SRA10-024.000-SLSRA10-024.000-SLPBC Simplicity 60 Plus series supported shaft, 1060 steel, RC60-65, 8-12Ra, 5/8in diameter, 24in length. For use with 5/8in PBC bearings. Learn More
£271.00SKU: LAHP-N23-33WRPBKTLAHP-N23-33WRPBKTSureMotion motor mount, anodized aluminum, parallel. For use with LAHP-33 series actuators and NEMA 23 stepper motors. Learn More
£267.00SKU: LAHP-N23-33MTRBKTLAHP-N23-33MTRBKTSureMotion motor mount, anodized aluminum, axial. For use with LAHP-33 series actuators and NEMA 23 stepper motors. Learn More
£267.00SKU: LAHP-N17-33MTRBKTLAHP-N17-33MTRBKTSureMotion motor mount, anodized aluminum, axial. For use with LAHP-33 series actuators and NEMA 17 stepper motors. Learn More
£253.00SKU: LAHP-N14-25WRPBKTLAHP-N14-25WRPBKTSureMotion motor mount, anodized aluminum, parallel. For use with LAHP-25 series actuators and NEMA 14 stepper motors. Learn More
£263.00SKU: 3600-8M-30-NG3600-8M-30-NGSureMotion timing belt, 8mm pitch, 30mm wide, 450 tooth, 3600mm pitch length (circumference), neoprene, fiberglass reinforced. Learn More
£254.00SKU: HBR-77-DSHBR-77-DSIronHorse double output shaft, 2.000in. For use with HBR-77 series gearboxes. (4) keys, (1) spacer and (1) retaining ring included. Learn More
£287.00SKU: RPSS16-36RPSS16-36Out of stockSureMotion precision ground shaft, rotary, 303 stainless steel, RB-83, 10RMS, 1in diameter, 36in length. Learn More
£258.00SKU: SMR4-CDS-24SMR4-CDS-24Out of stockIronHorse screw conveyor drive shaft, 1-1/2in. For use with size 4 shaft mount gearboxes. Mounting hardware included. Learn More
£253.00SKU: SMR3-CDS-48SMR3-CDS-48Out of stockIronHorse screw conveyor drive shaft, 3in. For use with size 3 shaft mount gearboxes. Mounting hardware included. Learn More
£299.00SKU: WG-175-060-RWG-175-060-RIronHorse heavy-duty worm gearbox, 60:1 ratio, 56C-Face input, right hand, 0.875in diameter output shaft, nominal 0.25 hp at 1.0 SF, 433lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount. Learn More
£280.00SKU: WG-175-040-LWG-175-040-LIronHorse heavy-duty worm gearbox, 40:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 0.33hp at 1.0 SF, 714lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount. Learn More
£280.00SKU: WG-175-020-LWG-175-020-LIronHorse heavy-duty worm gearbox, 20:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 0.75hp at 1.0 SF, 737lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount. Learn More
£280.00SKU: WG-175-015-LWG-175-015-LIronHorse heavy-duty worm gearbox, 15:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 0.75hp at 1.0 SF, 554lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount. Learn More
£280.00SKU: WG-175-010-LWG-175-010-LIronHorse heavy-duty worm gearbox, 10:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 1hp at 1.0 SF, 515lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount. Learn More
£280.00SKU: WG-175-005-LWG-175-005-LIronHorse heavy-duty worm gearbox, 5:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 1.5hp at 1.0 SF, 499lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount. Learn More
£280.00SKU: WG-175-060-LWG-175-060-LIronHorse heavy-duty worm gearbox, 60:1 ratio, 56C-Face input, left hand, 0.875in diameter output shaft, nominal 0.25hp at 1.0 SF, 433lbf-in mechanical output torque, 1-3/4in center distance, cast iron housing, tapped-base mount. Learn More