Stepper Systems
Stepper Systems
Stepper Drives - Stepper Motors - Stepper Power Supplies - Interface Cables - Configuration Software
-
Stepper Motors in Single, Dual-Shaft and Encoder Models
-
IP65 Stepper Motors in Single-Shaft Models
-
Integrated Stepper Motors / Drives
-
Modular (Kit) Stepper Encoders
High performance microstepper drives with high torque stepper motors
SureStep® stepping systems provide simple and accurate control of position and speed where open-loop control and cost are considerations.
- Pulses (or "step" and "direction" signals) from an AutomationDirect PLC or other indexer motion controller are "translated" by the microstepping drive into precise movement of the stepping motor shaft.
- SureStep Advanced stepper drives accept pulse inputs, but they also can be commanded by an analog speed signal or by serial communication.
- SureStep serial communications control allows internal indexing (point-to-point moves), velocity control, run-to-sensor, etc.
- SureStep stepping motors use 2-phase technology with 200 full steps per revolution or 1.8" per full step.
- SureStep microstepping drives use advanced microstepping technology to smooth motor motion and stepping response in order to minimize vibration problems.
- The SureStep family has options for open loop control (no encoder), position monitoring (external encoder feedback), and inclusive position verification (integrated motor/drives with internal encoder).
- SureStep stepper motor, microstepper drive and power supply products provide low-cost, reliable, high quality solutions to positioning and motion control application requirements.
Complete SureStep Stepping Systems Overview
- £219.00SKU: STP-LE23-1H09ADJSTP-LE23-1H09ADJSureStep stepper motor linear actuator, external nut, encoder ready, NEMA 23 frame, IP40, single stack, 2.1A, 9in lead screw length, 6mm/rev, 12mm lead screw diameter, screw code H, journal and groove end machining. Learn More
- £213.00SKU: STP-LE23-1H06ADJSTP-LE23-1H06ADJSureStep stepper motor linear actuator, external nut, encoder ready, NEMA 23 frame, IP40, single stack, 2.1A, 6in lead screw length, 6mm/rev, 12mm lead screw diameter, screw code H, journal and groove end machining. Learn More
- £215.00SKU: STP-LE23-1G06ADJSTP-LE23-1G06ADJSureStep stepper motor linear actuator, external nut, encoder ready, NEMA 23 frame, IP40, single stack, 2.1A, 6in lead screw length, 2mm/rev, 12mm lead screw diameter, screw code G, journal and groove end machining. Learn More
- £213.00SKU: STP-LE23-1G12ANNSTP-LE23-1G12ANNSureStep stepper motor linear actuator, external nut, NEMA 23 frame, IP40, single stack, 2.1A, 12in lead screw length, 2mm/rev, 12mm lead screw diameter, screw code G, no end machining. Learn More
- £217.00SKU: STP-MTR-23055WSTP-MTR-23055WSureStep stepper motor, NEMA 23 frame, IP65, single shaft, 2.8A, 166 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. Learn More
- £213.00SKU: STP-MTRH-34097STP-MTRH-34097SureStep NEMA 34 stepper motor, single shaft, 861 oz-in holding torque, 6.3 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More