Motion Control
 |
Motion control typically refers to systems with accurate position/velocity/torque capabilities operating in either open or closed loop mode. Open loop stepping drives send motion commands to stepper motors, but receive no information about the result. Closed loop servo systems have feedback devices at the motor shaft to verify or adjust the resulting motion. |
-
£73.00SKU: STP-DRVA-RC-050ASTP-DRVA-RC-050ASureStep regen clamp, 50W, 10-80 VDC, 10 ohm, enclosed. For use with DC input stepper and servo drives. Connections for up to (3) drives. Learn More -
£73.00SKU: EM556SEM556SLeadshine DC microstepping drive, 5.6A per phase, 2-phase, 24-48 VDC, bipolar, MOSFET, dual H-bridge and 4-quadrant output, 200 to 25600 steps per revolution. Learn More -
£77.00SKU: STP-MTRAC-23044DSTP-MTRAC-23044DSureStep stepper motor, NEMA 23 frame, IP40, dual shaft, encoder ready, 0.71A, 75 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. Learn More -
£76.00SKU: STP-MTRAC-23044STP-MTRAC-23044SureStep stepper motor, NEMA 23 frame, IP40, single shaft, 0.71A, 75 oz-in holding torque, 1.8-degree step angle, 200 steps per revolution, bipolar. Learn More -
£76.00SKU: LARSACC-012LARSACC-012SureMotion linear ball bushing, open type, 1 inch inside diameter, self-aligning. Seals included. Learn More -
£79.00SKU: STP-MTRH-23079DSTP-MTRH-23079DSureStep NEMA 23 stepper motor, dual shaft, 286 oz-in holding torque, 5.6 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More -
£73.00SKU: STP-MTRH-23079STP-MTRH-23079SureStep NEMA 23 stepper motor, single shaft, 286 oz-in holding torque, 5.6 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More -
£72.00SKU: STP-MTR-23079DSTP-MTR-23079DSureStep NEMA 23 stepper motor, dual shaft, 276 oz-in holding torque, 2.8 amps/phase, 1.8 degrees / full step (200 steps/revolution), bipolar. 12-inch cable. Learn More -
£73.00SKU: DC-SBS25-0808DC-SBS25-0808SureMotion drive coupling, servo-beam, stainless steel body, setscrew, size 25, 1/2 inch bore. Learn More