Product Spec |
MOBILE
-
4G (LTE) - LTE Cat 4 150 Mbps DL, 50 Mbps UL; 3G - 21 Mbps DL, 5.76 Mbps UL; 2G - 236.8 kbps DL, 236.8 kbps UL
-
2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
-
IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
-
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
-
Supports sending and reading Unstructured Supplementary Service Data messages
-
Operator black/white list (by country or separate operators)
-
Band lock, Used band status display
-
-
Direct connection (bridge) between mobile ISP and device on LAN
-
Router assigns its mobile WAN IP address to another device on LAN
ETHERNET
-
2 x ETH ports (can be configured as WAN), 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
POE OUT
-
-
802.3af and 802.3at Alternative B
-
PoE Max Power per Port (at PSE)
24 W Max (power supply unit dependent)
NETWORK
-
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
-
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
-
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
-
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
-
Port forward, traffic rules, custom rules
-
View all your Firewall statistics, rules, and rule counters
-
View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
-
Visual representation of your network, showing which devices are connected to which other devices
-
Static and dynamic IP allocation, DHCP Relay
-
QoS / Smart Queue Management (SQM)
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
-
Supported >25 service providers, others can be configured manually
-
VRRP, Wired options, each of which can be used as an automatic Failover
-
Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes
-
Possibility to mount remote file system via SSH protocol
SECURITY
-
Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
-
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
-
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
-
Port and tag-based VLAN separation
-
Mobile data limit, customizable period, start time, warning limit, phone number
-
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
-
Flexible access control of SSH, Web interface, CLI and Telnet
VPN
-
Multiple clients and a server can run simultaneously, 27 encryption methods
-
DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,
BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
-
IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
-
GRE tunnel, GRE tunnel over IPsec support
-
Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
-
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
-
Method of building scalable IPsec VPNs
-
SSTP client instance support
-
ZeroTier VPN client support
-
WireGuard VPN client and server support
-
Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
OPC UA
-
-
Supported connection types
MODBUS
-
-
Supported connection types
-
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
-
8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
DATA TO SERVER
-
HTTP(S), MQTT, Azure MQTT
-
Extract parameters from multiple sources and different protocols, and send them all to a single server
MODBUS MQTT GATEWAY
-
Allows sending commands and receiving data from MODBUS Server through MQTT broker
DLMS
-
DLMS - standard protocol for utility meter data exchange
API
-
Teltonika Networks Web API (beta) support
Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com
MONITORING & MANAGEMENT
-
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
-
Firmware update from server, automatic notification
-
-
Receive email message status alerts of various services
-
SMS status, SMS configuration, send/read SMS via HTTP POST/GET
-
Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer
-
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
-
MQTT Broker, MQTT publisher
-
SNMP (v1, v2, v3), SNMP Trap
-
Management API over HTTP/HTTPS
-
Teltonika Remote Management System (RMS)
IOT PLATFORMS
-
Allows monitoring of: Device data, Mobile data, Network info, Availability
-
Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
-
Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
-
Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
SYSTEM CHARACTERISTICS
-
Mediatek, 580 MHz, MIPS 24KEc
-
-
FIRMWARE / CONFIGURATION
-
Update FW from file, check FW on server, configuration profiles, configuration backup
-
-
Update FW/configuration for multiple devices at once
-
Update FW without losing current configuration
FIRMWARE CUSTOMISATION
-
RutOS (OpenWrt based Linux OS)
-
Busybox shell, Lua, C, C++, and Python, Java in Package manager
-
SDK package with build environment provided
-
You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs.
POWER
-
-
42.5–57.0 VDC, reverse polarity protection, voltage surge/transient protection
-
Input voltage range for PoE
42.5–57.0 VDC, reverse polarity protection, voltage surge/transient protection
-
Idle: < 2.5 W / Max: < 6 W / PoE Max < 21 W
PHYSICAL INTERFACES
-
2 x RJ45 ports, 10/100 Mbps
-
3 x Mobile connection type, 3 x Mobile connection strength, 4 x ETH status LEDs
-
2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V
-
RJ45, PoE In, 42.5 – 57.0 VDC
-
-
1 x 698 - 960 / 1710 - 2690MHz, 50 Ω, VSWR <3.5, gain <3 dBi, omnidirectional
1 x 698 - 960 / 1710 - 2690MHz, 50 Ω, VSWR <3, gain <4.5 dBi, omnidirectional
-
Reboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
-
-
-
-
Mounting Bracket (for vertical flat surface or pole mounting)
OPERATING ENVIRONMENT
-
-
10% to 90% non-condensing
-
Ingress Protection Rating
REGULATORY & TYPE APPROVALS
|