 | 14-9-2011
NITRA™ D-Series heavy-duty air cylinders are interchangeable with other popular brands of NFPA cylinders and are ideal for applications where abusive conditions are a concern. The series has a maximum operating pressure of 250 psi and includes bore sizes from 1-1/2 inches to 4 inches and stroke lengths from one inch to 24 inches. The heavy-duty double-acting cylinders are constructed with high quality aluminum components, including a piston fitted with a PTFE wear band and a magnetic ring that can be used for rod position sensing. Optional rod clevis, rod eye, rear clevis bracket, rear pivot eye and flange mounting plate attachments are available for cylinder mounting. The NITRA D-series pneumatic cylinders are available for same-day shipment, have a 2-year warranty and are made in the USA. |
|
|
 | 31-8-2011
Jumper system design improvements have been made to the screwless series of terminal blocks and to the triple-level series of screw-type terminal blocks. The new products are identical in width and height and have the same sizes as the original line, with the only change being the design of the jumper system. Screwless terminal blocks save time and money and offer a quick and easy clamping system that is secure and maintenance free. Triple-level feed-through terminal blocks enable high density wiring and the triple-level sensor terminal blocks simplify low-cost sensor wiring. LED indication sensor terminal blocks are also available. |
|
|
 | 17-8-2011
The New expanded ZIPLink™ connection system eliminates the normally tedious process of wiring between devices by utilizing prewired cables and DIN rail mount connector modules. ZIPLink cables reduce the time to wire Productivity3000 PAC, DirectLOGIC and CLICK PLC I/O modules to terminal blocks and third party devices. New cables including prewired connections for AutomationDirect’s controller, motion and drive products have been added, as well as additional 3rd party connection cables and two new 16-channel relay modules. |
|
|
 | 17-8-2011
The Edison JHL series of 1 - 600 Amp, 600 VAC / 450 VDC fuses combines the performance of high-speed semiconductor fuses and the convenience of Class J branch-circuit fuses in one small package. The fuses are current limiting and are designed with no intentional time delay to open quickly on overload allowing maximum protection for AC and DC drives and controllers. The extremely fast-acting fuses are also ideal for use with power semiconductor devices which utilize diodes, GTOs, SCRs, or SSRs, as well as electronic motor controllers. |
|
|
 | 17-8-2011
STRIDE™ industrial-grade unmanaged Ethernet switches and media converters now includes several models that support SC type push/pull fiber optic connections in addition to the existing bayonet type ST fiber optic connector versions. Fiber optic communications cables are immune to electrical and magnetic interference and are not affected by voltage transients. All STRIDE models offer multiple 10/100BaseT RJ45 Ethernet ports; standard temperature range (-10 to +60 °C) and wider temperature range (-40 to +85 °C) versions are available. These DIN rail-mountable true plug-and-play devices automatically determine and remember devices connected to each port and only route messages through the appropriate ports, increasing speed and bandwidth. |
|
|
 | 27-7-2011
Compact limit switches have been added to our extensive lineup of double insulated plastic (PBT) and heavy-duty metal IEC limit switches. The new AEM2G series compact limit switches feature 35mm wide die-cast housings and are equipped with one normally-open and one normally-closed contact; all units include a three-meter cable. The IP67-rated series utilizes standard 25mm hole spacing and a wide variety of head actuators is available. Almost all actuator styles are available in both snap-action and slow-make/slow-break contact versions. |
|
|
 | 27-7-2011
Our SOLO® brand temperature / process controllers are now available in 24 VDC input power versions; adding to the existing product lineup of 100 to 240 VAC 50 / 60 Hz input power units. SOLO single-loop controllers are available in four standard DIN sizes (1/4, 1/8, 1/16, and 1/32) and offer dual output control; selectable universal inputs accept thermocouple, RTD, milliamp (mA), millivolt (mV) and DC voltages. Four types of control modes are available (PID, ON/OFF, Ramp/Soak, Manual). Output types include relay, voltage pulse, current, and linear voltage (depending upon controller model). |
|
|
 | 13-7-2011
IronHorse™ MTCP Series Premium Efficiency AC motors meet or exceed the premium efficiency standards of the Energy Independence and Security Act of 2007 (EISA 2007). These premium efficiency Ironhorse AC motors range from 1 to 200 hp and are available in speeds of 1200, 1800, and 3600 RPM. High efficiency 250 hp and 300 hp motors are also available. The TEFC (Totally Enclosed Fan Cooled) industrial duty motors feature ribbed cast iron frames for maximum cooling. Accessories include C-flange kits for C-face mounting of the MTCP T-frame motors, replacement fans, fan shrouds and junction boxes. |
|
|
 | 29-6-2011
LR series line reactors for AC Drives are used on the input side of a drive to protect the AC drive from transient overvoltage conditions and reduce harmonics associated with AC drives. LR series line reactors on the output side of a drive protect the motor insulation against AC drive short circuits and IGBT reflective wave damage, and allow the motor to run cooler by "smoothing" the motor current waveform. LR series reactors have universal mounting feet with multiple mounting slots and can replace most reactors using the existing mounting holes. With sizes for AC drive applications from 1/4 hp to 300 hp, LR series line reactors can be used on the input or output side of any manufacturer's AC drive. LR series line reactors provide significant cost savings and are backed by a 10-year warranty. |
|
|
 | 29-6-2011
Wera, a leading manufacturer of screwdriving tools, is known for their attention to quality, ease of use, and a safety-friendly design. Wera standard (non-insulated), insulated, and miniature screwdrivers and screwdriver sets have flat (slotted) and Phillips blade tips with a micro-rough surface laser treatment for less slipping. Screwdriver handles are marked with blade type and tip size for easy identification. Insulated screwdrivers provide protection up to 1000 volts. Also available are a screwdriver set with bits stored in the handle, a driver bit set with mini bit ratchet, 1/4 Inch hex torque drivers with adjustable settings for torque-controlled tightening and hex key sets in metric or inch sizes. With limited lifetime warranty. |
|
|
 | 29-6-2011
Three horsepower and larger DURApulse AC drives have built-in cooling fans; some DURApulse drives require multiple fans. These VFD replacement fans are direct replacements for the internal factory-installed internal cooling fans in GS3 Series DURApulse drives and can only be used with applicable DURApulse drives. The fans are dimensionally and electrically equivalent to the originals and are not intended for other use. Installation instructions and electrical cable with connectors are included with each drive replacement fan. |
|
|
 | 8-6-2011
The MB-GATEWAY is a single port Modbus Gateway module that converts Modbus TCP to Modbus RTU. It supports up to 12 simultaneous Modbus TCP Client (master) Ethernet connections, and up to 128 RTU Server (slave) serial connections. MB-GATEWAY requires 10VDC to 36VDC from an external power supply. The gateway module features an automatic read function and each module has one RJ45 10/100 Mbps Ethernet port and one RS-422/485 2 or 4-wire serial port. It supports NetEdit (the free utility that can be used to manage our Ethernet-enabled devices) or Web Browser based configuration tools. |
|
|
 | 18-5-2011
Now available are IP68/IP69K-rated 5,000 psi pressure transmitters with zero to 10V or 4 to 20mA outputs. With higher operating and burst pressures, the transmitters are ideal for use in hydraulics, presses, high pressure lubrication systems and more. New TTD temperature transmitters, for use with RTD probes, are available in three temperature ranges. With M12 quick-disconnects for fast wiring, the transmitters provide a high accuracy two-wire or three-wire 4-20mA signal output. The IP67 rated transmitters convert low-level RTD temperature probe output signals to high-level analog signals, making them more appropriate for long-distance transmission. Backed by a three-year warranty. |
|
|
 | 18-5-2011
The GS-EDRV100 Ethernet drive module provides a high-performance Ethernet link between a control system and any AutomationDirect GS or DURApulse AC drive. The module mounts on 35mm DIN rail and connects the drive to AutomationDirect H2-ERM, H4-ERM, Productivity3000, KEPDirect OPC Server, KEPDirect EBC I/O Server, or independent controllers with a Modbus TCP/IP driver. The module features a built-in Web browser which allows users to configure and control the drive from any Web browser. The new H2-SERIO-4 serial communications module for WinPLC and PC-based control systems has two RS-232C ports and one RS-422/485 terminal. Each port on the module is capable of full hardware handshaking. |
|
|
 | 18-5-2011
The FB series M18 plastic DC photoelectric sensors are 18mm sensors in diffuse, polarized reflective and through-beam models with sensing distances ranging from 70mm to eight meters. All models feature M12 quick-disconnects and are available in NPN and PNP output logic configurations. Twelve models of the PB series inductive DC proximity sensors are available in 12mm, 18mm and 30mm sizes, with shielded and unshielded housings and sensing ranges of 2mm to 15mm. Fitted with M12 quick-disconnects, the nickel-plated brass sensors are IP67 rated and feature either NPN or PNP logic outputs. |
|
|
 | 4-5-2011
NITRA™ pneumatic BVS series modular solenoid valves are body ported 3-port (3-way) poppet valves available in 2-position, normally open or normally closed configurations. Models are available with removable flying leads or with 8 mm Micro DIN connectors. Units are DIN rail mountable when used with the BVM series solenoid valve manifolds. The NITRA™ pneumatic BVM series modular solenoid valve manifolds simplify the mounting and wiring of BVS series solenoid valves. The manifolds are available in 4- and 8-station models with push-to-connect inlet and outlet connections and a 9- pin D-sub connector for quick and easy tubing and wiring. Backed by a 2-year warranty. |
|
|
 | 4-5-2011
These heavy-duty multi-wire connectors are used wherever there is a need for a secure, simple and time-saving assembly of machinery and facilities. The connector housings offer excellent protection against dirt, moisture and mechanical stress. Multi-wire connectors make it possible to easily connect signal, power, and data connections. The customer-assembled connectors consist of a base, inserts, hood and accessories. The connectors are available in 3A, 6B, 10B, 16B and 24B sizes. Base and hood housings are of heavy duty die cast aluminum or thermoplastic (3A sizes). Screw termination or crimp termination inserts are available as are single and double locking systems. All components are UL and CE approved and NEMA certified. Accessories include NPT adapters, plugs, cable glands, crimp tools and DIN rail mounting kits. |
|
|
 | 20-4-2011
The GX Series of rectangular non-metal photoelectric sensors features an 18mm diameter threaded lens with included mounting hex nut and a M12 quick-disconnect. The GX3 series is a diffuse photoelectric available with either NPN or PNP light-on outputs, background suppression and fixed sensing distances of 100mm or 150mm. The GXP series is a polarized reflective photoelectric available with either PNP light-on output or NPN or PNP dark-on output and feature fixed sensing distances of up to 20 meters. GXP sensors include one round reflector. Through-beam GXR/E series photoelectric sensors are available with either NPN or PNP light-on or dark-on outputs and offer fixed sensing distances of up to 4 meters. |
|
|
 | 20-4-2011
Fuji Command 30mm metal pushbuttons feature large 65mm diameter plastic operators and mount in a standard 30.5mm hole. These momentary non-illuminated pushbuttons are available in four colors - red, green, yellow and black. All colors are available with N.O. & N.C. contacts or 1 N.O. contact, except red which is available with 1 N.C. contact. The pushbuttons include operator, support base and contact block(s). Replacement contact blocks are available in single packs. Additional contact blocks can be arranged up to four deep by two wide. |
|
|
 | 30-3-2011
KEPDirect OPC Server connects your favorite Windows client software directly to AutomationDirect DirectLOGIC PLC serial or Ethernet ports; Productivity3000 PAC; DL205, DL405, Terminator Ethernet I/O; or DURApulse AC drives and GS series AC drives by way of a GS-EDRV module. Any industrial HMI, SCADA, data historian, MES or ERP software package that includes an OPC client interface (most do) can connect to our PLC hardware for cost-effective data acquisition or control. Simply install the KEPDirect OPC Server software on the same PC (or on the same network) as your client application and enable the OPC client driver for direct access to your AutomationDirect device on the network. You can even use Visual Basic® to create data logging or simple HMI screens. |
|
|
 | 30-3-2011
The AcuAMP™ series of current sensors now includes both AC and DC current transducers and switches. The new DCT series of DC current transducers combines a Hall Effect sensor and signal conditioner into a single package for use in DC current applications up to 400A. Designed to be compatible with most PLCs, data loggers and SCADA systems, the DCT transducer series features jumper-selectable current input ranges and industry standard 4-20 mA or +/- 10 VDC outputs. New DCS100 series DC current switches feature jumper-selectable current input ranges up to 100A and are available in normally-open solid-state and SPDT relay output models. AcuAMP™ current sensors are backed by a five-year warranty. |
|
|
 | 30-3-2011
AcuAMP™ Ground Fault Sensors help protect people, products, and processes from damage that can be caused by ground fault conditions. Good design practice and code require that all AC power systems be grounded. GFS series sensors are designed to work on grounded AC power systems. The GFS series monitors all current carrying conductors in grounded single and three-phase delta or wye systems. GFS series sensors offer jumper-selectable setpoints of 5, 10 or 30 mA. The sensors can accommodate up to 14 AWG copper wire and feature mechanical relay outputs with either manual or auto reset. The UL and CE approved GFS series of ground fault sensors. |
|
|
 | 30-3-2011
The AcuAMP™ ACL1 Current Indicator is a small, inexpensive, simple LED ring which slides over a conductor to give a flashing indication of current flow. This AC current indicator unit is ideal for use in control panels to substantiate current flow. The ACL1 current indicator is a cost-effective way to detect live conductors and see that current is flowing to fans, heaters, pumps, lighting or other powered devices. The ACL1 AC Current Indicator is UL 508 listed, RoHS compliant. |
|
|
> | 16-3-2011
Gladiator compact fusible switches are available in UL 98 rated Class CC fuse and UL 508 rated Midget fuse models. Single-pole, two-pole and triple-pole AC versions and a single-pole DC version are offered. The full voltage rating of up to 600 VAC (80 VDC) allows installation in many applications for feeder and branch circuit protection. The compact DIN rail mount switches save space in control panels by using only one-third the space of a molded circuit breaker and two-thirds the space of traditional fusible switches. Gladiator switches have Lockout / Tagout capability, finger safe construction and the compact fusible switches also provide open fuse indication for faster troubleshooting and reduced downtime. An auxiliary contact with one N.O. and one N.C. contact is also available. |
|
|
 | 16-2-2011
Safety relay modules from Dold consist of safety relays that are controlled by a variety of built-in monitoring functions. Single and dual channel safety relay modules are available for emergency stop and safety gate applications with single or dual channel monitoring and with or without time delays. Two Hand Control safety relay modules are intended for applications such as stamping where an operator must activate a separate button with each hand. Light curtain controller modules are used for monitoring light curtain applications. Each application group offers variations in operating voltage (24VDC; 110 or 230VAC) and output contact configuration. A relay extension module is available to increase the number of output contacts. All Units are RoHS, CE, UL Listed and tested by TUV for compliance. |
|
|
 | 16-2-2011
Industrial strength and easy mounting, the new LF40 series of rectangular inductive proximity sensors have 40mm x 40mm sensing faces and offer long sensing ranges up to 35mm. LED power and status indicators are located at corners of the sensing face and are visible at a wide angle. Two shielded and two unshielded models are available and the sensors have rotatable and locking M12 connectors. LF40 rectangular proximity sensors are IP67 rated. New metal face proximity sensors include the 8mm PEW series, 18mm PKW series and 30mm PTW series. The sensors are constructed of high grade stainless steel specifically for machining applications and the all metal housings resist coolant ingress and imbedding of flying metal scraps. |
|
|
 | 2-2-2011
Hammond HPS Fortress commercial encapsulated single phase power transformers are now available in 100VA up to 25kVA ratings. All units are encapsulated with electrical grade silica sand and resin compounds to protect the core and coils, sealing out moisture and airborne contaminants and eliminating corrosion and deterioration. The NEMA 3R enclosures meet or exceed NEMA and ANSI standards for indoor and outdoor applications, and are UL and CSA listed as well as CE approved. The Fortress series encapsulated transformers are backed with a 10-year limited warranty. |
|
|
 | 19-1-2011
SR44 soft starters provide 115 or 230 VAC selectable control voltages and easily adjustable motor start and stop times for three-phase AC induction motor control. The Optimizing Mode improves motor efficiency and power while delivering the demanded torque at low rpm. These fully programmable units have keypads with two-line displays and programmable I/O for remote/PLC control applications. Suitable for a variety of motor loads, Stellar SR44 soft starters can be used for motor reversing, with external contactors, and can be connected "in-delta", allowing for use of a smaller soft starter. Stellar SR44 soft starters are UL listed, CE, REACH, and RoHS approved. |
|
|
 | 19-1-2011
NITRA bonded polyurethane tubing is shore A 98 hardness rated making it ideal for use with NITRA push-to-connect fittings. Available in 5/32 to 1/2-inch and 4mm to 12mm sizes, bonded straight tubing. NITRA polyurethane coiled tubing is available in single, double, and triple bonded configurations with double and triple coils in contrasting colors. Available in sizes ranging from 5/32-inch to 3/8-inch and 4mm to 10mm. Reinforced polyurethane hoses are fitted with one rigid and one swivel fitting and come in quarter-inch and 3/8-inch inside diameter sizes. Reinforced polyurethane straight and coiled hose, with a shore A 85 hardness rating, is strong, flexible and kink resistant. NITRA coiled hose has a shore A 98 hardness. |
|
|
 | 19-1-2011
The new C-series cylinders feature type 304 stainless steel bodies with anodized aluminum alloy heads. The type 303 stainless piston rod is equipped with Buna “N” O-ring rod seals and sintered bronze rod bushings. The double-acting cylinders are available in 9/16-inch to three-inch bore sizes and stroke lengths from 0.25 inch to four inches. Optional clevis brackets and rod eyes are also available. Backed with a two-year warranty. |
|
|
 | 15-12-2010
Two series of safety light curtains (Active Optoelectronic Protective Devices) are now available from AutomationDirect. These safety curtains are used for human protection and product/machine safety where risks cannot be eliminated by machine design and the process might require open and frequent access. The YBB-14 light curtain series has a 14mm sensing resolution for finger size protection and an operating distance of up to 3.5 meters. The YBB-30 light curtain series has a 30mm resolution for hand protection and an operating distance of up to 12 meters. These light curtains fully meet category 4, PL e type 4 machine safety requirements and are IP65 rated. Mounting brackets are included and additional mounting accessories and protective columns are available. |
|
|
 | 15-12-2010
A superb line of machine guarding safety switches to detect unsafe conditions and isolate power. Normally closed contacts are used for a positive break and redundant N.C. contact and N.O. feedback outputs are available. The safety switches cannot be easily defeated and all units have CE, UL and CSA approvals. Four bases are available: 30mm plastic, 50mm zinc alloy, 40mm aluminum and 60mm aluminum. Four types of interlocks are available for common safety applications including tongue (key), shaft hinge, and lever hinge interlocks plus pull cord actuators with reset for emergency stop or without reset for simple stop. Don’t let price stand in the way of making your machine or process as safe as possible. |
|
|
 | 4-11-2010
A new line of food and beverage sensor products includes 12mm, 18mm and 30mm DC proximity sensors with M12 quick-disconnect plugs; 18mm and 30mm series proximity sensors with half-inch micro AC quick-disconnect plugs; magnetic proximity sensors in 12mm and 18mm diameters; and 18mm photoelectric sensors. IP69K-rated sensor cables in five and 10 meter lengths with axial and right-angle M12 or half-inch micro connectors have also been added. The food and beverage industry is one of the harshest environments for sensors. Our IP69K-rated sensors and quick connection cables make our sensors compatible with such harsh environments. |
|
|
 | 4-11-2010
The TJN series 300 VAC and TJS series 600 VAC fuses are extremely fast-acting fuses in a compact, space-saving size, making them ideal for use as the main fuse protection for panel boards, load centers, meter stacks, and AC drives. Available in one to 600 Amp sizes, the fuses are current limiting and are designed with no intentional time delay to open quickly on overload. Screw and box lug-type fuses blocks for Class T fuses are also available. |
|
|
 | 13-10-2010
Type J and Type K thermocouple probes are available with cast aluminum NEMA 4 connection heads. Fixed and spring-loaded 1/4" diameter probes in 4", 6" or 12" lengths. Thermocouple welded and spring-loaded probes with 1/2" x 1/2" hex nipples allow easy replacement of existing probes and easy connection to wiring junction boxes. The spring-loaded style provides positive tip contact in thermowells. Thermocouple probes with pre-attached plugs featuring 1/8" or 1/4" diameter sheaths, thermocouple probes with lead wire transition, adjustable immersion sensors and bolt-on ring sensors are also available. Accessories include thermocouple extension wire, thermowells, compression mounting fittings, bayonet adapters and thermocouple connectors. |
|
|
 | 13-10-2010
1/4" diameter stainless steel RTD probes with 100 ohm platinum three-wire elements are available in 6", 12" or 18" lengths. Models include welded and spring-loaded probes with cast aluminum NEMA 4 connection head. Probes with 1/2" x 1/2" hex nipples provide easy replacement of existing probes. Also available are probes with pre-attached three-pin plugs for quick and easy wiring connection, as well as probes with lead wire transition or M12 connections. ProSense RTD sanitary Clean-in-place probes meet HTST pasteurization system requirements and have a -58 to 400° temperature sensing range. Accessories for RTDs include extension wire, thermowells, compression mounting fittings, bayonet adapters and RTD connectors. |
|
|
 | 6-10-2010
Lamonde Automation now offers a line of compact motor controllers that will also meet the demands of motor disconnects. These Bryant motor controllers are listed as "Suitable as Motor Disconnect" under UL Standard 508 – qualifying them to perform both operations in one compact package. The manual motor controllers are available in single-phase and 3-phase toggle switch and rotary switch versions in 30, 40 and 60 Amp sizes, up to 600 VAC, and in 2-pole and 3-pole switch configurations. NEMA 1 metal enclosed controller switches are designed for use in indoors. NEMA 3R thermoplastic and metal enclosed controller switches are rain tight for use outdoors. NEMA 4X enclosed toggle switch AC manual motor controllers are ideal for heavy washdown and corrosive environments. |
|
|
 | 25-8-2010
NITRA pneumatic air FRLs are available in 1/8 to 1-inch NPT female port sizes to match a broad range of pneumatic air supply applications. The modular design allows stand-alone applications or easy field assembly for combining the NITRA air preparation components (using assembly brackets purchased separately). AF Series air filters feature 40 micron replaceable filter elements as standard with 5 micron filter elements optional. AR Series pressure regulators in ranges of 20-130 psi or 7-60 psi. The AFR Series combines air filters and adjustable pressure regulators, all in a single convenient unit. |
|
|
 | 25-8-2010
NITRA pneumatic directional control solenoid valves meet a broad range of pneumatic control valve applications. Solenoid coils for each series are available in either 24 VDC or 120 VAC control voltages and DIN-style wiring connectors feature LED indication of solenoid coil status. AVP series three-way stackable poppet-style valves can be used in individual valve applications or multiple valves can be field assembled. AVS-3 series valves are body ported three-port (three-way) spool valves with port sizes up to 3/8-inch NPT. . AVS-5 series body ported five-port (four-way) 2-position and 3-position spool valves are available with port sizes up to 3/8-inch NPT. For multiple-valve applications, AM-5 series manifolds are available in 2, 4, 6 or 8 stations |
|
|
 | 12-5-2010
Cat5e Ethernet patch cables are available in eight colours and in 1-15m lengths. Crossover patch cables in yellow and orange are labeled with "crossover" on both ends. These Ethernet cables support up to 1000 Mbps, and are designed to reduce the effects of electromagnetic interference by incorporating a single metal foil shield which wraps around the entire set of four twisted shielded pairs. The robust RJ45 connectors are also shielded against electrical interference. The 350 MHz cables exceed all Cat5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) when compared to standard 100 MHz cables. |
|
|
 | 18-2-2010
These 1800 RPM IronHorse™ DC motors range in size from .33 to 2 HP and are ideal for applications such as conveyors, turntables, and whenever adjustable speed, constant torque, dynamic braking and reversing capabilities are needed. The DC motors are of rolled steel 56C-frame construction with cast aluminum end bell and removable base. Non-vented (TENV) and fan-cooled (TEFC) models are available. The motors feature linear speed/torque characteristics over the entire speed range, high starting torques for heavy load applications, reversible rotation, and dynamic braking capability for faster stops. |
|
|
 | 3-2-2010
Ruko hole saws are now supplied by AutomationDirect in hole cutting sizes from 9/16 inch diameter (14 mm) to 8 1/4 inch diameter (210 mm). These multi-purpose, bi-metal hole saws have an alloy steel jacket and cutting edges of either high speed steel (HSS) or high speed steel Cobalt 8 (Co8). High-Speed Steel saws easily cut materials such as unalloyed steel, non-ferrous and light metals, plastics, plasterboard and light building boards, fiberboard, plywood and wood. Cobalt 8 saws, with fine cutting teeth, work well with metals such as alloyed and non-alloyed steels, high chromium alloyed steels, such as stainless steel, non-ferrous and light metals. |
|
|
 | 3-2-2010
Edison HPB series open-style power distribution blocks are a convenient way to manage power distribution requirements. The series is UL listed and meets UL1953 standards. The distribution blocks are engineered to maintain an SCCR rating of 200kA with copper conductors and the series is available in ampere ratings of 175A and 310A. |
|
|
 | 16-12-2009
The 884114 and 884116 programmable universal signal conditioners convert, scale, isolate and transmit signals from a wide variety of process sensors and controller I/O. Scalable input signal types supported include mA, VDC, thermocouples, RTDs, linear resistance or potentiometer signals. The signals are converted to isolated current or voltage outputs; model 884116 also has two relay outputs for alarming and control functions. Three-way isolation between input, output, and power is provided. The 884501 LCD programming/display module is sold separately and snaps on the front of either of the universal signal conditioners for configuration, programming, and to display input signal values, engineering units, output signal, and relay status. |
|
|
 | 9-12-2009
BW series MCCBs from Fuji Electric in sizes up to 800A are more compact than any industrial circuit breakers on the market, so control panels take up less space. These industrial thermal-magnetic circuit breakers conform to worldwide standards, including UL / cULus / IEC / CE Marking / JIS / CCC. The three-pole, non-adjustable magnetic trip BW series MCCBs are suitable for feeder and branch circuits and offer standard type and high-interrupting capacities in identically sized housings. Five frame sizes are available. The BW125A and BW250A frames are 600V rated. BW400A, BW630A, and BW800A frame sizes are 480V rated. Rotary handles, flexible handles, auxiliary contacts, under-voltage release, shunt trip, replacement lugs, terminal covers and lockout attachments are available field installed accessories. |
|
|
 | 28-10-2009
Stellar™ brand SR22 series solid-state soft starters offer a low-cost alternative to motor control and are ideal for applications such as pumps, blowers and conveyors or any applications where traditional across-the-line starting or wye-delta starting is appropriate. Stellar soft starters use thyristors for controlled reduced voltage motor starting and stopping, and then switch to internal contacts for efficient running at rated speed. Stellar soft starters provide smoother control resulting in less torque, less shock, and less electrical and mechanical stress. These soft starters are available in 5A to 40A sizes, have an operating voltage range of 208 to 460 VAC, and are easily configurable. Two DIN-rail mountable frame sizes (45mm and 55mm) are available. |
|
|
 | 28-10-2009
New brown terminal blocks in the DINnectors DN-T10 and DN-T12 series have been added along with a new terminal block jumper system on the DN-T10, DN-T12, DN-M10 and DN-D10 series terminal blocks. Screw-type terminal blocks (DINnectors) include standard, single (feed-through), double and triple level terminal blocks, some in up to eight colors. Fused terminal blocks are also available. Screwless terminal blocks are also available that save time and money and offer a quick and easy clamping system that is maintenance free. |
|
|
 | 30-9-2009
New AutomationDirect M12 molded sensor cables have three LED indicators for power and signal status. LED quick-disconnect cables are available in 2, 5 and 10-meter lengths and have a 5-socket (3 or 4 wires attached) M12 female connector on one end and 3 or 4 wire open leads on the other end to provide fast and easy connection between sensors and terminal connections. A "lock in place" nickel plated brass coupling nut resists high levels of shock and vibration. M12 LED patch cables are available in six lengths ranging from 0.3m to 10m and have M12 connectors at each end (one male and one female with coupling nuts) to connect field devices. These LED sensor cables are designed for use with our position, pressure and temperature sensors (LED indication for DC PNP sensors only). |
|
|
 | 16-9-2009
The NITRA™ CPS series of pneumatic position switches provides an interface between pneumatic actuators and electrical control systems. These switches are designed for use with pneumatic cylinders with magnetic pistons and can be used to provide cylinder position indication, cycle count or to confirm operation. The solid-state switches are available in 3-wire DC, PNP and NPN normally open, and PNP normally closed configurations. Switches are available with either an M8 wiring connector or 2-meter cable with wire leads. Mounting clamps with adapters for round body cylinders are available ranging from 5/16" to 2" cylinder sizes. |
|
|
 | 10-9-2009
The Productivity3000 PAC is a compact controller that combines the features and capabilities of a PC-based control system with that of a typical programmable logic controller (PLC). Productivity3000 is a modular, rack-based system of up to 115,000+ I/O points with local, expansion and remote I/O bases and a full lineup of discrete, analog and specialty I/O modules. The high-performance CPU has 50Mb memory, fast scan times and industry leading 7 communication ports. ProductivitySuite programming software has user defined, tag-based programming for descriptive I/O naming. |
|
|
 | 10-9-2009
DataWorx P3K data logger software connects Ethernet-enabled Productivity3000 programmable automation controllers (PACs) to enterprise database systems and provides an easy and cost effective way to collect valuable machine and process control data. DataWorx P3K enables Productivity3000 PACs to connect with any Microsoft Access, SQL or ODBC compatible server and directly perform read or write database operations. |
|
|
 | 10-9-2009
The AutomationDirect ZIPLink wire management system eliminates the normally tedious process of wiring Productivity3000 PAC I/O to terminal blocks. One end of a ZIPLink cable plugs into a PAC I/O module and the other end into a ZIPLink connector module. ZIPLinks use half the space, at a fraction of the total cost of terminal blocks and cut your PAC wiring time from hours down to minutes. For user cost and space savings, many of the Productivity3000 I/O modules do not include terminals for direct connection of I/O. In particular, the high-density 32-pt and 64-pt modules require the use of the ZIPLink cables. |
|
|
 | 2-9-2009
NITRA air pneumatic push-to-connect union valve fittings have tough thermoplastic bodies and stainless steel tube gripping claws. With the hand valve in the closed (off) position, upstream air pressure is blocked while downstream air pressure is vented to atmosphere. Check flow valves allow air flow in one direction and block air flow in the reverse direction. When the downstream pneumatic tube is removed from the stop valve, upstream air pressure is blocked. |
|
|
 | 19-8-2009
The NITRA Pneumatics "A" series of non-repairable stainless steel round body cylinders includes bore sizes from 7/16" to 2" and stroke lengths from 1/2" to 18" to meet a broad range of applications. These cost-effective NITRA disposable cylinders reduce installation and maintenance costs and are interchangeable with cylinders from other major manufacturers. The cylinders are constructed with stainless steel bodies and double rolled-in high strength aluminum end caps with full flow ports. Single-acting (spring return) and double-acting models are available and mounting options include nose, pivot and double-end mounting. Cylinder versions in bore sizes from 9/16" to 2" are also available with magnetic pistons for position indication. |
|
|
 | 5-8-2009
In addition to our 1800 RPM motors, the IronHorse® general purpose AC motor line has been extended to include 3-phase 1200 RPM six-pole and 3600 RPM two-pole models. Six new 56C 3600 RPM rolled steel motors are now available, ranging from 0.33 to 2 HP; 13 new T-frame cast iron motors in 3600 and 1200 RPM models are available in sizes from 1 to 10 HP. The existing 1800 RPM motors range from 0.33 to 300 horsepower. These TEFC motors have 5:1 variable torque and 2:1 constant torque ratings and are ideal in applications such as fans, conveyors, pumps and more. IronHorse general purpose motors are available for same-day shipping and are backed by a two-year warranty. |
|
|
 | 29-7-2009
We now offer three types of monitor relays for motor control. These compact relays plug into an industry-standard 8-pin octal socket that can be DIN rail or panel mounted. The phase monitoring relays provide protection against premature equipment failure caused by undervoltage or overvoltage faults on 3-Phase systems. Phase monitoring relays also protect against single phasing. Alternating relays are used for motor load protection in special applications where the optimization of load usage is required by equalizing the run time of two loads. Pump seal failure relays are designed to monitor the shaft seals of submersible pumps for leakage. Single or dual channel seal failure relays are available for monitoring one or two pumps. |
|
|
 | 1-7-2009
ZIPport™ panel interface connectors mount on the outside of electrical control panel boxes and act as pass-through connections, allowing interface with PLCs and other programmable devices without opening the control box. Over 30 configurations are available with single, duplex or GFCI power outlets, as well as a no-power option. Communications connectors available include D-sub, RJ45, RJ12, USB, Ethernet, and Data Highway; and units are available in various combinations needed for the typical control panel. A standard reset 3 Amp circuit breaker limits power output of the unit. ZIPport panel interface connectors are NEMA and UL approved and are RoHS compliant. |
|
|
 | 1-7-2009
These multi-conductor portable power cables can be used in a variety of industrial environments both indoors and outdoors. Typical applications include wiring for industrial machinery, large appliances, heavy duty tools, motors, mining cable and temporary electrical power and lighting for construction sites. The flexible service cord is available in sizes ranging from 18 to 10 AWG, with two, three or four-conductor configurations. SEOOW type cord has a 600V rating while type SJEOOW cord has a 300V rating. Both are available in 50 and 250-foot lengths. Four-conductor, 8 AWG type W cord with a 2,000V rating is also available, in lengths from 10 to 250 feet. All flexible cord types are UL and CSA approved and RoHS compliant. |
|
|
 | 29-5-2009
Three new CPUs with built-in analogue I/O have been added to the CLICK™ Micro Brick programmable controller line. The new CPUs feature two 0-5 VDC or 4-20 mA analogue inputs and two 0-5 VDC or 4-20 mA analogue outputs. These CPUs also have four built-in discrete inputs and four discrete sourcing, sinking or relay outputs. The modules include three communication ports (two RS232 and one RS485), real time clock and battery backup for internal SRAM. Four Basic CPU modules are also available having eight discrete DC or AC inputs and six DC or relay outputs. All CLICK CPUs are configured with the easy-to-use programming software, available as a free download. |
|
|
 | 29-5-2009
The DINnector™ line of terminal blocks and accessories now includes circuit disconnect, thermocouple and plug-in style terminal blocks plus supplementary circuit breaker terminal blocks and sockets. Disconnect terminal blocks allow fast circuit disconnection without rewiring and are available with or without LED indicators. Thermocouple terminal blocks provide suitable connections to thermocouple sensors. Single and double level plug-in terminal blocks accept EURO (DN-nnPLUG) plugs. Supplementary circuit breaker terminal blocks are available in 1/4 amp to 10 amp sizes and the sockets are available with or without LED indicators. New accessories include end covers, spacers, pin protectors and marking tags, as well as two-pole and three-pole jumpers. |
|
|
 | 29-5-2009
Fuji electric contactors line now includes versions with higher coil voltages. The new SC series components operate with AC coil voltage ranges of 440-480V and 500-550V at 60hz and are available in frame sizes of 43mm, 54mm and 67mm. SC series SUPERMAGNET™ Coil contactors now include 88mm, 100mm and 115mm frame models with AC coil voltage ranges of 380-450V and 460-575V at 50/60hz. Also now available with SUPERMAGNET coils are the Odyssey series contactors in 138mm and 148mm frame sizes, with AC coil voltage ranges of 380-450V and 460-575V at 50/60hz. |
|
|
 | 20-5-2009
ZIPport multi-port junction blocks are a simple and effective way to organize machine wiring for a variety of control systems applications. They are especially useful as sensor junction blocks to consolidate wiring from various types of sensors. By allowing multiple sensors to be wired to a single block with one cable connecting to the control panel, the junction blocks provide time, cost and space savings. Four, six and eight-port junction blocks are available in field wireable or five-meter cable versions and feature four and five-pin M12 connectors and a choice of one or two I/O per port. Operating temperature range is -20°C to +80°C (-4°F to +176°F) and the blocks are IP67 rated with all ports connected or covered with protective caps. ZIPport junction blocks are available with or without power and signal LED indicators. |
|
|
 | 29-4-2009
The new PSC series in 5, 12 and 24 VDC adjustable output versions includes eight models with power ratings from 12W to 90W and feature universal 85 to 264 VAC input voltage and output current limitation. These NEC Class 2 plastic-housed low-profile switching supplies provide tightly regulated output voltage for sensitive loads in industrial, commercial and residential environments. The PSC series is UL508 listed, UL1310 recognized for NEC Class 2 compliance, and CE marked. |
|
|
 | 22-4-2009
The Stride line of industrial-grade unmanaged Ethernet switches and media converters now includes aluminum housing versions (-WT) that are designed for wider temperature environments ranging from - 40 to +85 °C. The metal housing models also allow either DIN-rail or flat mounting as standard. Lower cost plastic (Lexan) housing versions are also available with standard operating temperature ranges (-10 to +60 C°). Stride Ethernet switches are available with from five to eight 10/100BaseT RJ45 Ethernet ports and an optional multimode 100BaseFX ST fiber optic port. By reducing the number of collisions that slow down an Ethernet control network, Stride switches help maintain more consistent network cycle times even under heavy I/O and data exchange. |
|
|
 | 8-4-2009
Hollow shaft gearboxes have been added to the IronHorse mechanical power transmission lineup which also includes right angle gearboxes with right-hand output shafts and dual shaft gearboxes with both right and left output shafts. Designed to change drive direction by 90 degrees, hollow shaft gearboxes are used when space is at a premium, such as for conveyors, or to simplify mechanical design. Constructed of cast iron one-piece housings, all three output types are available in four frame sizes, and six gear ratios from 5:1 to 60:1. |
|
|
 | AutomationDirect's C-more Micro-Graphic HMI line, exclusively from Lamonde Automation, now includes 6-inch text/graphic panels with touch screen displays. The 6-inch panels can be mounted in landscape (horizontal) or portrait (vertical) mode. Optional keypad bezels are also available for either horizontal or vertical panel mounting. C-more 6” micro-graphic panels are equipped with drivers to support all DirectLOGIC protocols as well as Allen-Bradley DF1 Full duplex, Allen-Bradley DF1 Half duplex, Allen-Bradley PLC5 DF1, AB DH485, Omron Host Link, Omron FINS serial, GE SNPX, Mitsubishi Melsec FX, Siemens PPI, and Entivity Modbus RTU. |
|
|
 | 16-point F2-16TD1P and F2-16TD2P DC Output Modules are Electronic Short Circuit Protected (ESCP) and detect missing external 24VDC, open load, over temperature, and over load current faults. Input points are automatically assigned as the fault status indicators. The modules offer either current source or sinking outputs. These new modules are supported in D2-250-1 and D2-260 CPUs only. |
|
|
 | ProSense™ pressure sensors are designed to monitor system pressure in applications such as hydraulics and pneumatics. PSD series electronic pressure switches, using strain gauge technology, are an ideal alternative to mechanical piston pressure switches. Mechanical adjustment dials rotate quickly to establish the setpoint and resetpoint; the switches detect pressure ranges up to 5800 psi (400 bar).
PTD Series compact pressure and vacuum transmitters provide an analogue output for reliable indication of pressures up to 1000 psi and vacuums to -14.5 psi. Pressure transmitter output options include 4 to 20 mA or 0 to 10 Volts and vacuum-style transmitters have 20 to 4 mA or 10 to 0 Volt outputs. |
|
|
 | AcuAMP™ single phase AC current transducer input ranges are now user-selectable from 2 A to 2000 A. These newest AcuAMP transducers are fixed core and have jumper selectable inputs from 375 amps all the way up to 2000 amps. Output is 4-20ma. Additionally, AcuAMP single phase AC current switches are now available in both N.O. and N.C. output configurations.
AcuAMP high performance current transducers and switches are available in split-core or fixed-core models and offer outstanding features, flexibility and durability. All models carry a five-year warranty. |
|
|
 | With four models, the new PSP series of DIN-rail mount DC-to-DC converters accepts a wide range of input voltages from 9.5 to 18VDC and 18 to 75VDC to allow operation from all popular DC supply voltages. By tightly regulating output voltages, these DC/DC converters provide reliable power sources for process controls, factory automation systems and other sensitive equipment in the industrial environment. |
|
|
 | Lamonde Automation now offers Edison fuse holders in single packs. The CHM and CHCC models feature multiple-pole configurations, finger-safe protection and optional “open-fuse” indication. Multi-phase connections are available for ganging poles. Each fuse holder is 35mm DIN rail-mountable. Class CC fuse holders are UL listed, CSA certified and CE compliant, while the Midget models are UL recognized, CSA certified, CE compliant, and IEC approved. |
|
|
 | Lamonde Automation has expanded its line of electrical wire for industrial applications to include 750m reels for its MTW, TFFN and THHN wire types. Available in sizes ranging from 0.82 to 21 sq.mm, and in the most popular colours. Also now available across all wire types and sizes, is a blue/white stripe style commonly used in DC control wiring. Three insulation types of electrical wiring for industrial applications. Type MTW is used in control cabinets, machine tool applications and appliance wiring applications. Type TFFN conductors are primarily used as fixture wire. Type THHN building wire is intended for general purpose industrial applications. Multiple wire sizes and colours are available. |
|
|
 | New foot switches, in single and double units, are designed for machines such as shearing and spinning machines, lathes, wrapping machines and riveting machines and presses. Foot switches are available in two operational formats: free movement and foot switch locked in neutral position. The extensive line-up of AutomationDirect pilot devices now includes 24V and 120V LED illuminated 22mm metal pushbuttons, selector switches, and indicators. |
|
|
 | Hammond control transformers are specifically designed for high inrush applications requiring reliable output voltage stability. Designed to meet industrial applications where electromagnetic devices such as relays, solenoids, etc. are used, they maximize inrush capability and output voltage regulation when electromagnetic devices are initially energized. These transformers are 50/60 Hertz, 600V class, machine tool rated with VA range from 50 VA up to 1000 VA. They are UL Listed, CE Mark, and RoHS Compliant. Finger safe terminal covers and primary side fuse kits are available. |
|
|
 | ATLAS™ industrial grade TFT color monitors are available in 15”, 17”, and 19” sizes and non-touch or analog resistive touch screen models. Thin panel-mounted depth and industrial specs make ATLAS monitors ideal for factory applications. The entire series is UL/cUL listed, complies with European CE and RoHS requirements, and is UL approved for Class I and II, Division 2 hazardous locations. |
|
|
 | These controllers are available in four standard DIN sizes (1/4, 1/8, 1/16, and 1/32) and offer dual output control; selectable universal inputs accept thermocouple, RTD, milliamp (mA), millivolt (mV) and DC voltages. Four types of control modes are available (PID, ON/OFF, Ramp/Soak, Manual). Output types include relay, voltage pulse, current, and linear voltage (depending upon controller model). |
|
|
| 
